SB03 – Acoustic Wall Tie
The SB03 acoustic wall tie is suitable for stud walls that require a resilient mount to attach the walls to the underside of slabs or upper floors structurally yet maintaining acoustic and impact isolation.
SPECIFICATION
Type: A
Category of Wall Tie: Cavity
Classification of Tie: Medium
Rated Cavity Width: 50mm
Maximum Cavity Width: 100mm
BENEFITS
- Achieves discontinuous construction.
- Suitable for metal or timber studs.
- Can be used to reduce mid-span deflection.
APPLICATIONS
Supports a stud wall along its top plate.
Attaches to a masonry wall or underside of a slab.
Lateral support for studs at mid height of high walls
FEATURES
Pre punched holes for either two nails or two Teks screws.
Minimum separation between wall leaves: 22mm.
Maximum lateral load: 0.25 kN.
Stiffness: 0.7 kN/mm (linear) up to 0.16 kN
Maximum deflection of resilient material: 2.3 mm.
MATERIALS
Galvanized (Z275) or stainless steel.
INSTALLATION
Generally at 600mm centres horizontally.
FASTENING REQUIREMENTS
Matrix recommends No. 12 Type 17 screw or equivalent.